MHD093A-024-PP0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911314797
The Bosch Rexroth Indramat MHD093A-024-PP0-AN is a servo motor in the MHD Synchronous Motors series. It features a continuous torque at standstill of 12.0 Nm and uses liquid cooling. The motor has a digital servo feedback encoder with absolute position detection and an IP65 protection rating.
Internal Product Review
The MHD093A-024-PP0-AN is a Bosch Rexroth Indramat servo motor with liquid cooling and IP65 protection. Absolute position detection beyond 4096 revolutions and ±0.5 angular minute system accuracy support precise axis control in demanding motion applications. A keyed shaft with shaft seal makes this unit a strong choice for reliable integration and long-term service.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-024-PP0-AN is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. As a compact drive component, it supports closed-loop positioning and velocity control for conveyors, machine tools, and robotic axes in industrial automation. Integrated optical feedback lets the drive amplifier correct rotor position in real time, helping the motor deliver repeatable motion cycles without an external load encoder. This makes the unit suitable for applications that need accurate starts, stops, and stable speed regulation under changing loads.
At stall, the rotor can deliver a continuous torque of 12.0 Nm. Heat generated at this load is removed through liquid cooling channels in the housing, which helps the motor maintain output during extended low-speed operation without relying on cabinet airflow. The enclosure has an IP65 rating to resist dust and water jets commonly found on factory floors. Safe operation is specified for an ambient range of 0 to 40 °C, so the motor should be used within normal industrial temperature conditions. Closed-loop accuracy remains within ± 0.5 angular minutes because the internal optical measuring system supplies digital servo feedback to the drive.
The motor uses a centering diameter of 130 mm and a dual flange bolt circle of 140 / 150 mm, which helps it mount securely on compact machine interfaces. The stator uses Insulation Class F, allowing winding temperatures up to 155 °C during continuous operation. Position data is preserved through absolute feedback covering more than 4096 revolutions, so the axis can resume operation without a homing move after power is restored. It also has a keyed shaft with a shaft seal, a power connector on side A, and an output connector interface, while winding code 024 identifies the electrical configuration. The motor is supplied without a holding brake, can be stored from −20 to 80 °C, and may be installed up to 1000 m above mean sea level.
