MHD093A-024-PP0-AA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911305411
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
10 Seconds
The Bosch Rexroth Indramat MHD093A-024-PP0-AA is a servo motor from the MHD Synchronous Motors series featuring a continuous torque at standstill of 12.0 Nm and housing cooling by natural convection. It comes with a keyed shaft, digital servo feedback with integrated encoder, and offers IP65 protection. The motor has a flange size of 140/150 mm and is designed without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-024-PP0-AA is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It converts three-phase AC power into controlled rotary motion for positioning tables, packaging units, and handling modules. A keyed shaft transfers torque to pulleys or couplings, and integrated absolute feedback lets the drive controller command precise angle changes without external sensors. With its sealed housing, the motor suits production lines that must run for long shifts. Its integrated feedback arrangement also reduces the need for separate external sensing hardware on the axis.
At standstill, the motor delivers a continuous torque of 12.0 Nm, which is sufficient for clamping or low-speed feed tasks without overheating. A centering diameter of 130 mm and a flange pattern of 140 / 150 mm simplify direct attachment to gearboxes or machine frames. The laminated stator uses winding code 024, and size 093 with length A keeps mass low while preserving magnetic cross-section. Position signals are generated optically by the integrated digital servo feedback system, which supports absolute referencing over more than 4096 revolutions. Power reaches the windings through a connector on side A, and the enclosure has an IP65 protection rating. The motor is supplied without a holding brake, so external locking devices must secure vertical axes when power is removed.
The motor uses Class F insulation, and cooling relies on natural convection, allowing full performance within an ambient range of 0 to 40 °C. Storage is permitted between −20 and +80 °C, and the motor may be mounted up to 1000 m above mean sea level without derating. System accuracy is specified at ± 0.5 angular minutes, and a shaft seal helps block dust and spray during prolonged duty. This level of accuracy supports precise positioning in repetitive indexing and feed applications. Natural cooling also avoids the added complexity of fan-based heat removal.
Frequently Asked Questions about MHD093A-024-PP0-AA:
Q: What is the continuous torque at standstill for the MHD093A-024-PP0-AA motor?
A: The MHD093A-024-PP0-AA motor provides a continuous torque of 12.0 Nm at standstill.
Q: What type of shaft and sealing does the MHD093A-024-PP0-AA feature?
A: This model uses a keyed shaft design and includes a shaft seal for added protection.
Q: What is the IP rating of the MHD093A-024-PP0-AA servo motor?
A: The degree of protection for this motor is rated at IP65.
Q: What kind of encoder feedback does the MHD093A-024-PP0-AA servo motor offer?
A: This motor uses digital servo feedback with an integrated encoder for position detection.
Q: How is the MHD093A-024-PP0-AA servo motor cooled?
A: The housing of the MHD093A-024-PP0-AA is cooled by natural convection.
