MHD093A-024-PG2-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911315513
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
42 Seconds
The Bosch Rexroth Indramat MHD093A-024-PG2-BN is part of the MHD Synchronous Motors series and features a plain shaft design with a centering diameter of 130 mm. This servo motor provides 12.0 Nm of continuous torque at standstill, IP65 degree of protection, and utilizes liquid cooling for its housing. It comes with a holding brake delivering 32.0 Nm of torque and uses digital servo feedback with an integrated encoder for position detection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-024-PG2-BN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is intended for tooling axes, material handling stations, and other automated equipment where controlled rotation is needed during positioning and transfer tasks. The motor supplies closed-loop rotary motion for applications that require constant torque at low speed and rapid acceleration when commanded by a drive controller.
This model develops a continuous standstill torque of 12.0 Nm, while a liquid-filled jacket removes heat through liquid cooling, supporting stable output during sustained load. Mounting uses a 130 mm centering diameter and a 140/150 mm flange pattern, and the plain shaft transmits power without a keyway. Protection against dust and water jets is rated at IP65. Size code 093, length code A, and winding code 024 identify the motor’s frame and winding arrangement. Electrical power reaches the stator windings through a connector on side B of the housing, which helps simplify cable routing inside a cabinet or machine enclosure. Digital servo feedback from an integrated optical encoder closes the speed loop and provides absolute position data to the drive.
During power-off or emergency stop, the integral brake locks the rotor with 32.0 Nm of torque, and a shaft seal helps block contaminant ingress. Motion accuracy is held to ± 0.5 angular minutes, and the encoder supplies absolute multi-turn data over more than 4096 revolutions for homing-free operation. The motor can be stored safely between −20 to +80 °C and operated in ambient air from 0 to 40 °C; insulation class F materials protect the windings during these conditions. Installation height must not exceed 1000 m above mean sea level to maintain cooling margins.
Frequently Asked Questions about MHD093A-024-PG2-BN:
Q: What type of cooling is used in the MHD093A-024-PG2-BN motor housing?
A: The MHD093A-024-PG2-BN servo motor features liquid cooling for its housing.
Q: What type of encoder does the MHD093A-024-PG2-BN use for feedback?
A: This motor is equipped with a digital servo feedback encoder with integrated optical position detection.
Q: What is the holding brake torque on the MHD093A-024-PG2-BN?
A: The holding brake in this model provides a torque of 32.0 Nm.
Q: What is the system accuracy of the MHD093A-024-PG2-BN?
A: This servo motor achieves a system accuracy of ±0.5 angular minutes.
Q: What is the continuous torque at standstill for the MHD093A-024-PG2-BN motor?
A: The MHD093A-024-PG2-BN has a continuous torque at standstill of 12.0 Nm.
