MHD093A-024-PG1-RA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911295539
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
25 Seconds
The Bosch Rexroth Indramat MHD093A-024-PG1-RA is a servo motor from the MHD Synchronous Motors series. It has a continuous torque at standstill of 12.0 Nm and is equipped with a holding brake that delivers 22.0 Nm of torque. This model features IP65 protection, a plain shaft with seal, and uses digital servo feedback with an integrated encoder for absolute position detection exceeding 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-024-PG1-RA is a servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Designed for closed-loop motion axes, it converts drive current into mechanical rotation and uses digital feedback so positioning tasks in automated machinery remain repeatable and accurate. Typical installations include gantries, packaging tables, and tool changers where compact synchronous motors provide stable torque, responsive speed control, and consistent axis motion over repeated cycles. The motor is also suited to transfer units and indexing stations that depend on accurate position correction during frequent starts, stops, and load changes.
This motor provides a continuous standstill torque of 12.0 Nm, and heat is removed by natural convection through the ribbed housing. Sealing to IP65 helps keep dust and water jets away from internal components, while Class F winding insulation supports the thermal demands of cyclic duty. A centering flange of 130 mm helps align the motor on the machine, and the plain shaft includes a shaft seal for added protection. It operates in ambient temperatures from 0 to 40 °C, can be stored from -20 to +80 °C, and can be installed up to 1000 m above mean sea level. Power is connected through a right-side connector, and an integrated optical encoder supplies digital servo feedback to the drive. The feedback signal allows the drive to monitor rotor position continuously during speed and positioning commands.
An integrated brake provides 22.0 Nm of static holding torque. The motor uses a flange pattern of 140 / 150 mm, and position accuracy is maintained within ±0.5 angular minutes. The feedback system stores multi-turn position data as Absolute (>4096 revolutions) tracking, and the high-resolution measurement process supports rapid interpolation while winding code 024 allows the drive to use the correct electrical parameters. Multi-turn feedback preserves position information through power loss, which helps the axis resume controlled motion without a reference search.
Frequently Asked Questions about MHD093A-024-PG1-RA:
Q: What type of shaft does the MHD093A-024-PG1-RA motor use?
A: The MHD093A-024-PG1-RA servo motor features a plain shaft design for smooth coupling with connected machinery.
Q: What is the holding brake torque on the MHD093A-024-PG1-RA?
A: This servo motor has a holding brake equipped with a torque of 22.0 Nm for secure load holding during stops.
Q: What kind of position detection does the MHD093A-024-PG1-RA servo motor provide?
A: The MHD093A-024-PG1-RA provides absolute position detection for more than 4096 revolutions, verified using an optical method.
Q: What is the degree of protection for the MHD093A-024-PG1-RA?
A: This motor is protected to IP65 standards, offering complete protection against dust and low-pressure water jets.
Q: What are the operating and storage temperature ranges for the MHD093A-024-PG1-RA?
A: The operating ambient temperature range for this model is 0 to 40 °C, with storage possible between -20 to +80 °C.
