Product Description:

Bosch Rexroth Indramat manufactures the MHD093A-024-PG0-LA, a servo motor in the MHD Synchronous Motors series. As part of a digitally controlled drive system, the unit converts commanded current into synchronized rotor motion so that machine axes reach their target positions with repeatable accuracy. The motor housing is designed for direct flange mounting, and its electrical interface uses a molded power connector that allows quick connection to the matching drive while maintaining the enclosure seal used on automated production equipment.

When running at standstill, the rotor can deliver a continuous torque of 12.0 Nm, allowing the axis to hold static mechanical loads without exceeding thermal limits. The aluminum enclosure complies with IP65, and reliable operation is permitted within an ambient range of 0 to 40 °C. Internally generated heat leaves the frame by natural convection with no external fan. Winding code 024 identifies the stator winding used with standard Bosch Rexroth inverters. An F-class insulation system, motor size 093 laminations, an A-length body, and a 140/150 mm square flange complete the mechanical layout.

Alignment during assembly is aided by a centering seat that measures 130 mm in diameter, and the smooth plain shaft is supplied without a holding brake for applications where the drive provides the required holding torque. Position feedback is supplied by a digital optical encoder, and its data stream supports absolute multiturn feedback over more than 4096 revolutions while maintaining a system accuracy of ±0.5 angular minutes. A shaft seal protects the front bearing and helps preserve the enclosure rating, while the power leads exit to the left to suit cabinet layouts. Installation altitude is limited to 1000 m above mean sea level, and the device tolerates warehouse temperatures from -20 to +80 °C during storage.