MHD093A-024-PG0-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911305000
The Bosch Rexroth Indramat MHD093A-024-PG0-BA is a servo motor from the MHD Synchronous Motors series, featuring a continuous torque at standstill of 12.0 Nm and a plain shaft design with seal. It provides IP65 protection and includes a digital servo feedback encoder with absolute position detection over more than 4096 revolutions. The motor has a flange size of 140/150 mm and uses natural convection for housing cooling.
Internal Product Review
The MHD093A-024-PG0-BA is a servo motor engineered with natural convection cooling and IP65 protection for dependable industrial service. Digital servo feedback with an integrated encoder and absolute position detection over 4096 revolutions support accurate, stable motion control. Continuous torque at standstill rated at 12.0 Nm makes the unit a strong choice for precise servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MHD093A-024-PG0-BA as part of the MHD Synchronous Motors series. This servo motor is intended for closed-loop positioning and speed control in industrial automation lines, where permanent-magnet synchronous technology provides high dynamic response. The unit uses an optically measured absolute encoder for feedback and is supplied without a holding brake, making it suitable for drives that rely on regenerative torque or external locking devices for standstill security.
The motor delivers a continuous standstill torque of 12.0 Nm, giving machines ample low-speed force for material handling or indexing axes. Its housing carries a protection rating of IP65, so internal windings and bearings are protected from dust ingress and low-pressure water jets. A centering diameter of 130 mm aligns the flange interface accurately with gearboxes or machine frames, and heat is removed through natural convection, eliminating the need for auxiliary blowers. The motor can operate in ambient temperatures from 0 to 40 °C without torque derating, and insulation class F materials allow winding temperatures up to 155 °C. Power is routed through a connector on side B, while a plain shaft supports coupling with clamp hubs or shrink-fit clutches.
For storage or standby, permissible temperatures widen to -20 to +80 °C, allowing the motor to be kept in unconditioned warehouses between production cycles. Closed-loop positioning accuracy is maintained within ± 0.5 angular minutes, supporting multi-axis assemblies that require tight synchronization. Installations can be located up to 1000 m above sea level without adjustment, and the feedback system provides absolute multiturn capability for more than 4096 revolutions. A digital servo interface transmits both position and diagnostic data, and the naturally cooled housing permits unrestricted mounting orientations as long as convection airflow is not obstructed.
