Product Description:

The MHD093A-024-PG0-AA is a servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It converts drive current into precise rotary motion for pick-and-place gantries, carton erectors, and other automated stations. Position data is returned through an integrated digital encoder so the controller can close the feedback loop in real time. A plain shaft design simplifies coupling to external mechanics, and the compact 093 frame size allows installation where space or mass is limited.

At standstill, the motor provides a continuous torque of 12.0 Nm, supplying steady holding force for low-speed indexing. The housing meets IP65, which helps keep dust and water jets away from internal components. Heat is removed by natural convection, eliminating the need for external blowers. The flange follows a 140 / 150 mm bolt pattern, and the centering pilot is 130 mm for concentric mounting. Rated operation is permitted from 0 to 40 °C, matching typical cabinet climates. Power arrives on side A through an output connector, while a shaft seal helps block lubricant escape during washdown cleaning. Winding code 024 identifies the electrical characteristics used by compatible MHD amplifiers.

The windings use F class insulation, which supports the temperature limits expected in standard duty cycles. During storage, the unit tolerates ambient temperatures from -20 to +80 °C, and it may be mounted up to 1000 m above mean sea level without derating. Position capture uses an optical measurement method with a system accuracy of ± 0.5 angular minutes and provides absolute multi-turn data for more than 4096 revolutions to the drive. The motor is supplied without a holding brake, so vertical axes require external locking or drive-applied torque. Motor length code A indicates the stack height used for this frame size.