MHD093A-024-NG0-BP Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911305405
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
57 Seconds
The Bosch Rexroth Indramat MHD093A-024-NG0-BP is a servo motor from the MHD Synchronous Motors series, featuring a continuous torque at standstill of 12.0 Nm and a flange size of 140 or 150 mm. It is equipped with digital servo feedback for encoder type, has IP65 degree of protection, and uses natural convection cooling. The motor does not include a holding brake and has a plain shaft with a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-024-NG0-BP is a servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Carrying winding code 024 within a 093-frame housing, it converts three-phase drive output into controlled rotary motion for positioning axes, feed drives, and indexing stations. Its A length keeps the motor short enough for installations with limited axial space. A plain shaft, an output connector oriented toward side B, and a relative position detection scheme integrate easily with standard drive controllers while reducing installation depth.
At standstill the motor can deliver a continuous torque of 12.0 Nm, so it holds static loads without overheating. A centering diameter of 130 mm aligns the 140 / 150 mm mounting flange to machine frames. The laminated stator uses insulation class F to tolerate winding temperatures up to 155 °C during repeated duty cycles. Environmental sealing reaches IP65, blocking dust and water jets, while operation is allowed at ambient temperatures from 0 to 40 °C. Rotor position information comes from Digital servo feedback (HSF), an optical measurement method that transmits relative position data to the controller for rapid closed-loop updates.
Heat dissipates through a ribbed casing designed for natural convection, so passive cooling avoids the need for extra fans and external airflow hardware. The motor is shipped without a holding brake, so any power-off restraint must be handled externally. Position repeatability is maintained within ± 0.5 angular minutes under compatible drive settings. A square mounting interface of 140 / 150 mm fits common machine flanges, and the factory-installed shaft seal limits oil migration along the plain shaft. Storage is permitted between -20 and +80 °C, and operation is allowed at altitudes up to 1000 m above sea level without output derating.
Frequently Asked Questions about MHD093A-024-NG0-BP:
Q: What is the degree of protection of the MHD093A-024-NG0-BP motor?
A: This motor features IP65 protection, making it dust-tight and resistant to water jets from any direction.
Q: What is the continuous standstill torque rating for the MHD093A-024-NG0-BP?
A: The MHD093A-024-NG0-BP delivers a continuous torque of 12.0 Nm at standstill.
Q: What type of encoder does the MHD093A-024-NG0-BP use?
A: This model is equipped with digital servo feedback (HSF) for precise position monitoring.
Q: What is the shaft type of the MHD093A-024-NG0-BP motor?
A: The shaft on this motor is a plain design, providing a simple mounting interface for couplings or gears.
Q: What cooling method and protection features are included for the housing of the MHD093A-024-NG0-BP motor?
A: The cooling type for this motor is natural convection and it comes with IP68 protective features for the housing.
