MHD071B-061-PP0-UN-R Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
34 Seconds
The Bosch Rexroth Indramat MHD071B-061-PP0-UN-R is a servo motor in the MHD Synchronous Motors series with a flange size of 115 mm and centering diameter of 95 mm. This model features liquid cooling, a keyed shaft with a shaft seal, and provides 8.0 Nm continuous torque at standstill. Its digital servo feedback with integrated encoder supports absolute position detection for more than 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD071B-061-PP0-UN-R is a servo motor produced by Bosch Rexroth Indramat and supplied in the MHD Synchronous Motors series. As an electromechanical actuator for industrial automation, the unit converts commanded electrical energy into controlled rotary motion for axes that require closed-loop speed and position regulation on packaging lines, gantry stages, and robotics. Its synchronous design supports smooth response during repeated acceleration, deceleration, and positioning moves in automated machinery. It is supplied without a holding brake, so back-driving loads require an external locking mechanism.
Its mechanical interface uses a centering diameter of 95 mm, allowing precise concentric alignment when the 115 mm square flange is bolted to gearboxes or machine frames. At standstill, the rotor can deliver 8.0 Nm of continuous torque, giving stable holding force for positioning tasks without thermal overload. Thermal management is handled through liquid cooling, so circulating coolant removes heat directly from the housing and supports higher duty cycles than natural-convection designs. Power is transmitted through a keyed shaft, which helps prevent angular slippage between the motor and the coupled load during repeated start-stop cycles.
A shaft seal is fitted at the output end to help block lubricant migration and airborne contaminants. The power and feedback connectors can be swiveled through 270°, which simplifies cable routing in tight cabinets without exceeding bending limits. This swivel range is useful when the motor is mounted close to guards, machine panels, or neighboring axes. Rotor angle is reported by a digital servo feedback device with absolute (>4096 revolutions) multi-turn resolution, so the drive can retain position information after power is restored and track long travel without a homing cycle. The motor has length B, size 071, and winding code 061.
Frequently Asked Questions about MHD071B-061-PP0-UN-R:
Q: What is the centering diameter of the MHD071B-061-PP0-UN-R motor?
A: The MHD071B-061-PP0-UN-R motor features a centering diameter of 95 mm.
Q: What is the continuous torque at standstill for the MHD071B-061-PP0-UN-R?
A: This model provides a continuous torque at standstill of 8.0 Nm.
Q: What type of encoder does the MHD071B-061-PP0-UN-R use for feedback?
A: The MHD071B-061-PP0-UN-R is equipped with digital servo feedback and an integrated encoder.
Q: What type of housing cooling does the MHD071B-061-PP0-UN-R motor utilize?
A: Liquid cooling is used for housing temperature management in this motor.
Q: Does the MHD071B-061-PP0-UN-R motor include a holding brake?
A: This motor is manufactured without a holding brake as part of its standard configuration.
