MHD071B-061-NG0-UP Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911294950
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
54 Seconds
The Bosch Rexroth Indramat MHD071B-061-NG0-UP is a servo motor from the MHD Synchronous Motors series that features a continuous torque at standstill of 8.0 Nm and a plain shaft with a shaft seal. It uses a digital servo feedback encoder and has natural convection cooling with IP68 protection. The flange size is 115 mm and the motor comes without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD071B-061-NG0-UP is an AC servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It is intended for mid-frame automation axes that require repeatable velocity and position control in assembly, packaging, and handling equipment. A relative position encoder inside the housing reports incremental movement to the drive, allowing closed-loop regulation so the load follows commanded profiles without significant overshoot or drift. This feedback arrangement also supports stable correction of speed changes during acceleration, deceleration, and reversing moves.
The motor can deliver 8.0 Nm of continuous torque at standstill, giving machines adequate force for low-speed holding and controlled indexing. A centering flange of 95 mm works with a 115 mm square flange for direct mounting on compatible machine interfaces. Feedback is provided by Digital servo feedback (HSF), which supplies position data needed for accurate speed and motion control. Heat is removed by natural convection, and the housing has IP68 protection against dust and water ingress. That combination supports use in installations where sealed construction is important and added cooling hardware is not desired.
Mechanical output is through a plain shaft with a shaft seal, allowing direct coupling to gears or belt pulleys while helping keep contaminants away from the bearing area. The power connector housing can be rotated through 270°, which makes cable routing easier when space around the motor is limited. Winding code 061 matches the electrical characteristics expected by compatible Rexroth inverters. The B-length housing balances inertia and torque response, and the motor is supplied without a holding brake, so parked loads must be secured by drive torque or an external mechanical lock.
Frequently Asked Questions about MHD071B-061-NG0-UP:
Q: What is the centering diameter of the MHD071B-061-NG0-UP motor?
A: The MHD071B-061-NG0-UP provides a centering diameter of 95 mm for easy alignment during installation.
Q: What is the continuous standstill torque of the MHD071B-061-NG0-UP?
A: This model delivers a continuous torque of 8.0 Nm at standstill.
Q: What type of encoder is used in the MHD071B-061-NG0-UP?
A: The MHD071B-061-NG0-UP features digital servo feedback (HSF) for position detection.
Q: How is the MHD071B-061-NG0-UP cooled and protected?
A: Natural convection cooling is used with IP68 protections in this motor.
Q: Does the MHD071B-061-NG0-UP include a holding brake?
A: This model is manufactured without a holding brake.
