MHD071B-035 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
52 Seconds
The Bosch Rexroth Indramat MHD071B-035 is a servo motor from the MHD Synchronous Motors series. It features a flange size of 115 mm and a centering diameter of 95 mm. The motor delivers a continuous torque at standstill of 8.0 Nm and has a motor size of 071 with motor length B.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD071B-035 is an AC synchronous drive intended for axis positioning tasks in packaging lines, material-handling gantries, and similar automation cells. It belongs to the MHD Synchronous Motors series developed by Bosch Rexroth Indramat, and it converts commanded current from a servo amplifier into repeatable rotary motion for cams, belts, or ball screws.
The stator generates a rated shaft load of 8.0 Nm at standstill, giving designers a clear baseline for continuous torque calculations. A centering pilot of 95 mm simplifies coaxial alignment to planetary gearboxes or machine frames, while the square flange measures 115 mm on each side so bolt patterns match IEC size 100 reducers. Tight dimensional tolerances allow quick interchange across the entire MHD Synchronous Motors family, and the mechanical envelope is consistent with Bosch Rexroth’s Bosch Rexroth Indramat mounting guidelines. Thermal mass, magnet volume, and winding cross-section are balanced so that the motor can deliver its rated output without external cooling when installed in standard cabinets.
Length code B defines the axial housing depth and therefore the available copper volume, whereas frame number 071 identifies the rotor diameter group used by this platform. The unit is classified as a Servo Motor, meaning the resolver or encoder feedback is processed in closed-loop mode for sub-milliradian positioning accuracy. Electrical characteristics are tied to winding code 035, which specifies conductor gauge and turns-per-phase so the connected drive can source appropriate peak and RMS currents at typical bus voltages.
Wake Industrial offers same-day shipping for urgent orders, keeps quotations valid for 30 days, and provides a free chat tool for questions on fault codes or type codes.
Frequently Asked Questions about MHD071B-035:
Q: What is the continuous torque at standstill for the MHD071B-035 motor?
A: This model produces a continuous standstill torque of 8.0 Nm.
Q: What is the centering diameter of the MHD071B-035 model?
A: The centering diameter provided on this motor is 95 mm for secure mounting.
Q: What is the flange size of the MHD071B-035 motor?
A: The flange size for this servo motor is specified at 115 mm.
Q: What is the motor length version designated for MHD071B-035?
A: This motor is built in length version B, which influences its physical dimensions.
Q: What winding code is featured on the Bosch Rexroth Indramat MHD071B-035 motor?
A: The winding code for this model is 035, affecting its electrical properties.
