Product Description

Bosch Rexroth is a global leader in the manufacture of AC servo motors, synchronous motors, spindle motors, drive controllers, control sections, brake choppers, and other equipment for a wide range of industries.

The MDD115C-N-030-N2M-130GA1 model has a balancing class of N, and temperatures should be kept between -20 and +80 degrees Celsius when transporting the motor from one area to another. The model's design incorporates both electronic commutation and permanent magnetic properties, and it rotates at a nominal speed of 3000 RPM, delivering 47 Nm of continuous torque and 77 A of continuous current. The MDD112C AC servo motor is intended to have a long lifespan due to its brushless design and lubricated bearings. The model generates a theoretical torque of 146.4 Nm with a current consumption of 346.4 A and should be operated within a temperature range of 0 to +45 degree centigrade. The model has a 1.9-kilogram holding brake with a moment of inertia of 9.5 x 10^-4 kgm² and a holding torque of 45 Nm. Place pressure reliefs in the conduit threaded joint of the motor power connection on the A-side of the motor housing to ensure intrusion-free operation. The insulation level of the MDD115C AC servo motor is F, and it has a plain output shaft with a sealing ring on top.

The model MDD115C-N-030-N2M-130GA1 has a 130 mm centering diameter, and installation must be between 0 and 1000 meters above sea level; else, the required performance values will not be achieved. The motor has a moment of inertia of 222 x 10^-4 kgm² and a thermal time constant of 90 minutes. The model (MDD115C-N-030-N2M-130GA1) has digital servo feedback and an integrated multiturn absolute encoder and weighs 52 kilos.