Product Description

The MDD115C-N-015-N2M-130GB2 is a state-of-the-art electrical servo motor designed by Rexroth Indramat to generate kinetic energy in industrial production and processing systems. This electrical motor is an environmentally friendly device that features a very durable housing unit and can maintain an operational efficiency as high as 95 per cent for more than five years without the risk of sudden machine breakdown. The MDD115C-N-015-N2M-130GB2 industrial motor is a brushless industrial machine that assures a high contouring accuracy at high feed rates. The housing of this industrial motor provides protection according to the IP65 protection category, this housing is also covered with a prime black coating which is resistant to mildly corrosive liquid chemical substances such as dilute acids, dilute alkali, seawater and sewage. The handling, configuration and installation of this industrial motor have been designed to be easy and straightforward, however, to ensure operational safety, the motor should always be handled in accordance with the instructions stated in its documentation.

The MDD115C-N-015-N2M-130GB2 electrical motor is a permanent magnet-excited synchronous motor with electronic commutation. The magnet present in the motor are made from rare earth or iron oxide materials, the use of these materials allows the motor to operate with low inertia. The MDD115C-N-015-N2M-130GB2 electrical motor connects to the drive controller through two major cables; the power cable and the motor feedback cable. These two cables enter the housing of the motor through special electrical connectors that are designed to preserve the IP65 protection provided by the motor’s housing unit.

The MDD115C-N-015-N2M-130GB2 electrical motor features an electrically releasing holding break which helps to retain the load connected to the motor’s output shaft when the motor is not in operation. The maximum permissible installation height for this industrial motor is about 1000 meters above sea level.