Product Description

The Bosch MDD115C-F-015-N2L-130GA0 is a MDD series digital AC servo motor. As per the type code, its frame size code is 115 and frame length code is C. The length of the motor housing is 458 millimeters. Diameter of the plain motor shaft is 32 millimeters. Approximately 60 millimeters of the motor shaft are outside the motor housing. The motor mounts through screw holes on the 193 millimeter motor flange. Centering diameters of the motor is 130 millimeters. Nominal speed of the MDD115C-F-015-N2L-130GA0 motor is 1500 RPM. Because of their very high power density, motors from the MDD115 series are specially well suited to highly-dynamic applications such as roller feeds for nibbling, punching and pressing machines as well as tool changing devices. Balance class of the motor is standard. The shaft B-end is also standard i.e. the shaft does not have a B-end.

The MDD115C-F-015-N2L-130GA0 motor supports digital servo feedback. This feature allows sharing of information about motor speed and torque with a drive controller. The feedback from the motor allows the drive controller to track and control motor parameters. The controller also supplies motor power. The power cable connects to a power socket located on side A of the housing. Optional blocking brakes are available for MDD motors. However, the MDD115C-F-015-N2L-130GA0 is not supplied with a blocking brake. The motor performance data included in the product documentation is valid for 0 to 45 degrees Celsius temperature and 0 to 3300 feet altitude. Motor operation outside these specified ambient conditions leads to output derating and should be avoided. Protection category of the motor is IP65 and its insulation class is F. Its surface is painted matte black.