Product Description

The Bosch MDD115B-N-015-N2L-130PA0 is a digital AC servo motor. The motor frame size is 115 and the motor frame length is B. The motor housing is designed for natural convection or surface cooling. The nominal motor speed is 1500 RPM. The continuous torque at standstill is 28 Nm with natural convection and 42 Nm with surface cooling. The continuous current at standstill is 20.9 Amps with natural convection and 31.3 Amps with surface cooling. The theoretical maximum torque that the MDD115B-N-015-N2L-130PA0 can deliver is 87.1 Nm. The maximum current that the motor can deliver is 93.9 Amps. The rotor moment of inertia is 0.0123 kg m². The motor thermal time constant is 90 minutes with natural convection and 60 minutes with surface cooling. The mass of the MDD115B-N-015-N2L-130PA0 motor is approximately 33 kilograms.

The balance class of the MDD115B-N-015-N2L-130PA0 motor is standard. The shaft B end of the motor is also standard. The MDD115B-N-015-N2L-130PA0 includes support for digital servo feedback. The motor gets power from a drive controller. The power cable connects to a power connector located on side A of the motor housing. A blocking brake is not available but can be ordered if required. The main shaft on the MDD115B-N-015-N2L-130PA0 motor includes a keyway according to DIN 6885-1. The centering diameter of the MDD115B-N-015-N2L- 130PA0 motor is 130 millimeters. The recommended ambient temperature for motor operation is 0 to 45 degrees Celsius. The recommended ambient temperature for motor storage is -20 to 80 degrees Celsius. The maximum installation elevation should be less than 1000 meters. The housing of the motor is IP65 rated and provides complete protection against dust ingress. The motor is painted black.