Product Description

Bosch Rexroth manufactures a broad variety of industrial automation products. AC servo motors, frequency converters, main spindle motors, and drive controllers are only a few of the company's resources that are frequently utilized in the market.

The MDD115A-N-030-N2L-130PA1 model is equipped with a holding brake that generates a holding torque of 45 Nm and weighs 1.9 kg. The clamping and release times of the holding brake are 55 and 18 milliseconds, respectively. The model power values cannot be produced unless the installation height and temperature requirements of 1000m above sea level and 0 to +45 degrees Celsius, respectively, are fulfilled. This MDD115A AC servo motor's output shaft is a keyed shaft with a shaft ring. This ac servo motor is one of the products supplied by the company that allows for maximum flexibility and modification to meet specific customer requirements. The model is equipped with a digital servo feedback encoder and a balancing class of N. The MDD115A AC servo motor has a 130 mm centering diameter and an A-side power connection. When combined with a drive controller, the motor provides a cost-effective and efficient method of monitoring and controlling your activities, while also increasing overall productivity.

The model's MDD115A-N-030-N2L-130PA1 contouring accuracy is exceptional, which is critical while operating at high speeds. The model weighs 33 kilograms and can reach a maximum speed of 3000 RPM while drawing just 42.4 amps and providing a respectable 28 Nm of torque. This motor's rotation angle is controlled by the duration of the imposed pulse, which is based on the pulse width modulation principle. The motor (MDD115A-N-030-N2L-130PA1) is protected to IP65 standards and has a 0.13-ohm winding resistance and a 2 mH winding inductance.