Product Description

The MDD115A-N-015-N2L-130GA0 digital AC servomotor features a power connector that can be crimped or soldered, based on the need. This Bosch Rexroth motor has a nominal speed of 1500min^-1. The product is fitted with a type plate on its housing that comprises its type designation and technical details that can be helpful to procure spare parts when there is a failure. The device must neither be tipped nor dropped during storage and transport. The unit should not have any impact on its output shaft so that its bearings do not get damaged. It should not be picked up by the blower.

The motor has two M8 tapped holes on its housing for screwing in lifting screws. The product supports picking up and transporting using chain tackle. The device is designed for transportation as well as storage only in the horizontal orientation. The unit encompasses spigot nuts on its connectors that must be screwed tightly in place when they are connected. It must be wired according to the terminal diagram of the machine manufacturer. This digital motor supports operation in nibbling machines. The product comes fitted with bearings that are lubricated for a lifetime. The servomotor has a warranty period of one year.

This product depicts a high cyclic load capacity that allows start-stop operations continuously with high repetition rates. The axial forces of the device are absorbed by the fixed bearing on the B side. The unit weighs 33kg. It comes with a thermal constant of 90 minutes when the natural convection cooling method is deployed. The motor has its power connector directed to the A-side. The product features a torque constant of 1.34Nm/A and a windings resistance of 0.54 Ohms at 20°C. The device produces digital servo feedback. The feedback cable of the unit has a diameter of 8.8+/-0.3mm. It is possible to send this motor to any address irrespective of the country you live in.