Product Description

Bosch Rexroth is a global leader in the manufacture of AC servo motors, synchronous motors, spindle motors, drive controllers, assembly-line equipment, and other components used in a wide range of industries.

The MDD112D-N-040-N2L-130PB1 model holding brake weighs 1.1 kilograms has a clamping and release delay of 30 and 70 milliseconds, respectively, and current consumption of 0.75 A. Include strain reliefs in the conduit threaded junction of the motor power connection and situate the power connector on the B side of the motor housing to guarantee intrusion-free operation. The working temperature of the MDD112D AC servo motor should be between 0 and 45 degrees Celsius, and the installation site should be between 0 and 1000 meters above sea level; otherwise, the required output values will not be fulfilled. The model has a winding inductivity of 0.7 mH and a thermal time constant of 120 minutes. The AC servo motor weighs 59 kg and has a moment of inertia of 230 x 10^-4 kgm² with a winding resistance of 0.5 ohms. Temperatures between -20 and +80 degrees Celsius should be sustained when transporting the motor from one area to another. The MDD112D AC servo motor has a shaft with a keyway for seamless torque transmission and a sealing ring for further protection.

The model MDD112D-N-040-N2L-130PB1 has both electronic commutation and permanent magnetic properties, and it rotates at a nominal speed of 4000 revolutions per minute while using 329.1 A of current. The motor is predicted to have a long lifespan and provide a theoretical torque of 132.2 Nm due to its brushless architecture and lubricated bearings. The model (MDD112D-N-040-N2L-130PB1) has an N balance class and an F insulation class.