Product Description

The Bosch Rexroth MDD112D-N-030-N2L-180GB2 digital AC servomotor portrays a breaking torque for its torque according to the DC bus voltage supplied at the drive. This servomotor has 15 minutes maximum duty cycle time. The product has two M8 tapped holes in its housing for screwing lifting screws designed as per DIN 580 specifications. This device must not be strapped with a crane belt on its shaft. The unit should not encounter any impact on its shaft. It has spigot nuts on its connectors that need to be tightly screwed in position when the connection is established. The motor has to be safeguarded against dropping and tipping during the storage period.

This product pickup should be done by holding on to the lifting screws when there is a blower attachment. The device has a mass of 59kg without its blocking brake or a blower. This unit has protection against damage and moisture because of its plastic protective covers. Its type plate features technical details like a continuous current, torque constant, thermal class and mode with both cooling types. The motor feedback cable has poor adhesion to prevent sticking in drag chains. This product must encompass strain reliefs in the conduit threaded joint of its power connector for interference-free operation.

The device has a 24VDC +/-10% nominal voltage rating for its blocking brake. This unit is installed in grinding machines where a high level of synchronism is required. It features bearings with lifetime lubrication with normal operation. The motor has IP 65 protection category for its feedback and power cables. This product depicts a compact construction resulting in a high power-to-weight ratio. The device has a defined load assimilation of external forces at its shaft. This unit supports attaching belt pulleys on its shaft directly. Its blocking brake offers no assurance of personnel safety. This MDD112D-N-030-N2L-180GB2 servomotor has a year’s backup support from Wake Industrial.