Product Description

The MDD112D-N-030-N2L-130PB3 digital AC servomotor has 112 size code. This Bosch Rexroth AC servomotor is used in grinding machines. This product has a nominal speed of 3000min^-1. The device is integrated with permanent magnets made of iron oxide. This unit has two sets of windings. Its permanent magnets are embedded in a laminated core. The motor comes with bearings that are lubricated for a lifetime. This product portrays defined load assimilation of external forces at the output shaft. The device encompasses a type plate on its housing. This unit is lifted and transported by a crane belt. It must never have moisture on its surface.

The motor makes use of a mounting flange with a 130mm pilot diameter. This device can function under poor adverse environmental conditions. The unit portrays a standard housing design. Its windings are integrated with a temperature sensor for monitoring the temperature. The product is fitted with a blower for implementing surface cooling. The device-related parameters are stored in the associated drive controller after the power-up. The unit has 38Nm continuous torque at standstill with natural convection and 60K overtemperature at the housing. Its blocking brake has a holding torque of 60Nm. This AC servomotor comes with a warranty tag for one year.

The motor is balanced with a 10 x 8 x 45 matching key as per DIN 6885-A specifications. This product features a nominal lifespan of 30,000 operating hours as per ISO 281 specifications. The device pick-up must be done only using the lifting screws inserted into the tapped holes when a blower is attached. This unit renders a high level of synchronization. Its operating curves highlight the permissible continuous torque with the S1 operating mode. The motor shaft is clamped at standstill by means of the blocking brake. This AC motor transportation is undertaken by reputed freight carriers.