Product Description

The MDD112D-N-030-N2L-130GR2 digital AC servomotor uses a temperature sensor in its windings to monitor its temperature. The Bosch Rexroth servomotor has a high cyclic load capacity. This product uses a flange with either throughholes or threads to support IM B5 or IM B14-type mounting. The device comprises a plain shaft for non-positive shaft-hub-connections. This unit has separate flanged sockets for the connectors of its cables. It is meant to function at a temperature ranging from 0°C to 45°C. The motor has IP 65 protection rating. This product supports mounting according to Design B14. The device is equipped with a shaft sealing around the shaft.

The motor has a standard 130mm pilot diameter. This product encounters thermal stress when bevel gear pinions are used. The device reseating action involves closing the blocking brake for a minute and then reconnecting it to the drive. This unit portrays N type balance class in compliance with DIN VDE 0530, Section 14 specifications. Its blocking brake offers no assurance of personnel safety. The motor power connector output direction cannot be changed like that of the feedback connector. This product features the required information for service on its type plate. The device has a 222.2A peak current rating. This MDD112D-N-030-N2L-130GR2 servomotor has a warranty for one year.

The motor is sized at 537mm. This product also has a minimum 10mm² cross-section for its power connection cable when it deploys natural convection cooling mode. The unit utilizes silicon-free and halogen-free power cables with resistance to hydrolysis and greases. Its blocking brake has a nominal voltage rating of 24VDC +/-10%. This motor allows only soldering for its power cables if they have inch diameters. The product utilizes feedback to evaluate its speed and position. This device depicts maximum speed in accordance with the DC bus voltage. This servomotor can be transported to any address of your choice irrespective of the country you live in.