Product Description

The MDD112D-N-020-N2L-180PA1 digital AC servomotor uses the digital drive controller to activate its blocking brake. The Bosch Rexroth motor has a D length code. The product has a mass of 59kg. The device comprises a reduced balance class. The unit supports a blower connection for surface cooling. Its blocking brake offers no assurance of personnel safety. The motor incorporates connections for the power cable as well as connecting cables for the blocking brake and temperature sensor in its power connector. This product stores its relative position in the drive controller. The device encompasses a breaking point for its maximum torque based on the DC bus voltage triggered by the supply source at the drive.

The motor depicts intermittent duty torque using its S6 operating mode. This unit portrays a permissible storage and transportation temperature range of -20°C to 80°C. It's coating on the housing is resistant to dilute acids and lyes. The product has 0.18 Ohms winding resistance at 20°C. The device housing features two tapped holes of M8 size to insert lifting screws for holding the motor in place. The unit transportation and/or storage must never be done in the vertical orientation. Its blocking brake opens when a 24VDC voltage is applied and the permanent magnetic field is canceled by the electric field.

The product deploys power cables with either inch diameters or metric diameters. The device's grounding connection with a drive amplifier must be established before its operation. Its blocking brake must be reconnected to the drive controller after its reseating process. The unit mounting on the machinery should be carried out only by skilled personnel. The motor bearings have a chance of getting damaged if the output shaft features heavy loads and impacts. This product features the assimilation of external forces at the shaft. This MDD112D-N-020-N2L-180PA1 motor with a warranty period of a year is shipped worldwide.