Product Description

The MDD112D-N-020-N2L-130GA2 digital AC servomotor by Bosch Rexroth along with the connected digital drive controller acts like a cost-effective and rapid-response automatization system. The motor offers an optimum solution for any application. The product is widely deployed in grinding machines. The device has 112 size code. This unit features a laminated core with permanent magnets. It portrays a brushless design. This motor has a flange design to support B05 and B14 mounting styles. The product offers a high degree of synchronization. The device is associated with a blocking brake that has 40Nm holding torque. The unit weighs 59kg. It has special feedback intended for this series.

The motor is intended for use at a maximum ambient temperature of 45°C. This product features covers and housing for its protection. The device incorporates axial and radial types of surface cooling. The unit has a prime coating that is black in color for its housing. Its coating may peel if it’s cleaned quite often with a steaming action. This motor installation can be done in the preferred orientation based on the requirement. The product houses a sealing ring around its output shaft. This device experiences a position shift when drive pinions featuring helical teeth are fitted on the shaft. The MDD112D-N-020-N2L-130GA2 motor with a one-year warranty is shipped to any destination.

The product permits the attachment of a blower for cooling when used with extreme loads. This device has a 0.87Nm/A torque constant at 20°C. The unit uses power cables with metric cable diameters for connecting to its power connector. Its blocking brake does not offer assurance of personnel protection. The motor features a completely sealed housing. This product has a 43.8A continuous current when cooled by natural convection in standstill mode. The device incorporates a non-positive style shaft hub connection for its shaft. The unit has separate connectors for its motor feedback and power connectors.