Product Description

The MDD112D-N-015-N2L-180PA0 digital AC servomotor tends to get affected on its A-side due to thermal deformations in length. This Bosch Rexroth motor can support a maximum radial force based on the point of application of force and its average speed. The product might need a blower attachment for cooling for instances when it operates with extreme loads. The device needs to be run at a speed of at least 100rpm as part of the reseating process. The unit has an N balance class in accordance with DIN VDE 0530, Section 14 specifications. The output direction of its power connection is towards the A side of the motor.

This motor comes with a 12-pin flanged socket for the feedback connection. The product supports an encoder with a relative indirect position evaluation. The device depicts its torque-limiting data and speed-limiting data by means of its operating curves. The unit depicts an intermittent duty torque with S6 operating mode in compliance with DIN 57530 specifications. Its angle connector when inserted inside the flange socket is directed to the B side. This direction can be changed by releasing the four fixing screws. This product has a 29.7A continuous current rating when it is in standstill mode.

The device comprises both fixed and floating bearings. The unit delivers high synchronous operation by sinusoidal application of the current along with high feedback resolution. Its bearings have a lifespan of 30,000 operating hours as per ISO 281 specifications. The motor feedback is digital servo feedback. The product has separate flanged sockets with connectors for feedback and power cable connections. This device installation elevation must never exceed 5000m over sea level. The unit portrays protection against contact to high voltage with live or moving parts. This motor with a warranty for one year can be sent to any address of your choice in the world.