Product Description

The MDD112C-N-040-N2L-130PB3 is a highly advanced product of the reputable Rexroth Indramat; it is an industrial motor designed to improve the operational efficiency of industrial machines by accurately operating as a reliable source of kinetic energy in the industrial servo system. This industrial motor is designed by industrial professionals according to American and European quality standards. Before the MDD112C-N-040-N2L-130PB3 servo motor is delivered to the end user, it is tested and certified to be perfectly safe for operation; it is also fitted with a type label that contains important identification information about the motor. This industrial servo motor is also a permanent magnet-excited device with electronic commutation; the permanent magnet present in the motor is made from iron oxide and other special materials that allow the motor to maintain low inertia during operation.

The MDD112C-N-040-N2L-130PB3 industrial servo motor features a sophisticated temperature monitoring system through the use of a temperature sensor built into the motor windings; this sophisticated system protects the motor from overload damage by helping the drive controller to keep a tab on the operational status of the motor. The continuous input current required by the MDD112C-N-040-N2L-130PB3 industrial motor during operation is about 58.1 amperes; at this current, the motor generates a continuous torque of 28-newton meters and operates at a nominal current of about 4000 revolutions per minute. Also, at a motor temperature of 20 degree Celsius, this industrial motor maintains a torque constant of 0.48-newton meters and a windings resistance of about 0.08 ohms.

The permissible ambient temperature suitable for the operation of this industrial motor falls between 0 to about 40 degrees Celsius; however, when the motor is not in active operation, it can be stored at a temperature as high as 80 degrees Celsius.