Product Description

The MDD112C-N-040-N2L-130GA2 is an industrial synchronous motor produced by Rexroth Indramat under ideal industrial conditions. This motor is manufactured according to international quality standards; it features a highly durable housing unit and a brushless design that allows it to operate at increased efficiency and reduced noise. This industrial motor is designed to be absolutely safe for industrial operation; however, it is important to ensure that this industrial motor is configured and operated by highly trained engineers according to the instructions stated in the documentation of the motor as the wrong handling of this motor causes can initiate the dangerous movement of the motor in the servo system. This motor also operates with an electronic commutation; this allows it to operate with a high overload capability and continuous start-stop operation at a high repeat frequency.

The MDD112C-N-040-N2L-130GA2 industrial motor features a resolver motor feedback which allows the drive controller to monitor and control the operation of the motor according to the configuration parameters that have been integrated into the controller. The centring diameter of this controller is about 50 millimetres. The power circuit of this industrial motor generates a leakage current of about 3.5 milliamperes. To prevent electrical accidents during operation, it is important for industrial operators to ensure that the motor is securely grounded before operation.

The MDD112C-N-040-N2L-130GA2 industrial motor also features an electrically releasing holding brake, which helps the motor to retain the load connected to the motor’s output shaft when the motor is at a standstill. This holding brake operates with an output torque of about 6.5-newton meters. The maximum permissible height at which this industrial motor can be operated is about 1000 meters sea level.