Product Description

The MDD112C-N-030-N2L-130PA1 is an advanced industrial motor produced by Rexroth Indramat under ideal industrial conditions to convert electrical energy into kinetic energy for industrial processing and production machines. This industrial motor is designed according to internationally acceptable standards, it features a housing unit that provides it with optimum protection and allows it to operate effectively in industrial conditions considered unfavourable for convectional industrial machines. The MDD112C-N-030-N2L-130PA1 industrial motor is a brushless device that maintains a high operational dynamic and can undergo continuous start-stop operations at a high repeat frequency. At the output shaft of this industrial motor are special grease lubricated ball bearings which are intended to reduce the frictional heat generated during the operation of the motor. These ball bearings have a service life of about 30,000 hours however this can be significantly reduced by the overloading of the device.

The mounting flange MDD112C-N-030-N2L-130PA1 industrial motor is designed in a way that mounting according to the B5 design (mounting with through holes) and B14 design (mounting with threads) is possible. This industrial motor also contains an internal encoder which monitors the operation of the motor and provides the drive controller with the digital signals it needs to accurately control the operation of this industrial motor in real-time.

Instructions concerning the configuration and installation of this industrial motor have been clearly stated in the documentation of this industrial motor, to ensure a smooth operation, the industrial operator should ensure all these instructions are strictly followed. Also, the continuous input current required by this motor is about 43.5 amperes, however, if the motor is applied with surface cooling, this input current is about 68.1 amperes.