Product Description

The MDD112C-N-020-R2L-180GA0 digital AC servomotor produced by Bosch Rexroth encompasses spigot nuts on its feedback and power connectors. This motor needs a chain tackle for its pickup and support. The product must have no load on its blower or output shaft when it is picked up using a crane and belts. The device storage has to be done in a dry environment that is free of dust and shock. The unit features details such as cooling mode, a continuous torque, protection rating and more on its type plate. Its power and feedback cables are intended to be operated and stored between -30°C and 80°C.

The motor has a 462mm overall length. This product features a lifespan of 30,000 operating hours for its bearings. The product also has RAL 9005 prime black coat over its housing. The device can use either straight or angle connectors for feedback. It must be ascertained that the cores allocation between the interface on the drive and the flanged socket is correct if the manufacturer’s cables are not used. The unit has an R balance class in accordance with DIN VDE 0530, Section 14 specifications. This product is an ideal choice for high-precision applications. The servomotor is equipped with one-year backup support.

The device with the related drive controller provides a rapid-response automatization system. This unit is characterized by a brushless design. Its rotor has a 170 x 10^-4 kgm² moment of inertia without the inclusion of a blower. The motor portrays a 0.94Nm/A torque constant at 20°C. The product encompasses high-performance data. The product is meant to be installed at a maximum 1000m elevation above sea level. This device uses pressure sleeves to couple belt pulleys onto the shaft. The unit encounters load on the shaft as soon as it is affected by forces. Its shaft is surrounded by a shaft sealing ring.