Product Description

Bosch Rexroth manufactures a comprehensive variety of factory automation products, notably ac servo motors, synchronous frequency converters, spindle motors, inverters, and drive controllers.

The MDD112C-N-020-N2M-180PA1 model is protected to IP 65 standards and delivers a continuous torque of 28 Nm while drawing a constant current of 29.7 Amps at rest. The moment of inertia of the model is 170 x 10^-4 kgm², whereas the winding inductivity is 5 mH. The MDD112C AC servo motor weighs 48 kilograms and is designed to last longer than other kinds of motors. The motor has a holding brake of 1.1 kg and is powered by a 24-volt source with a current intake of 0.75 A. The holding brake has a high holding torque and a clamping and releases delay of 30 and 70 milliseconds, respectively. The servo motor has a balancing class of N, an insulation class of F, and a conventional housing architecture that utilizes natural convection and surface cooling to maintain a constant interior temperature. The MDD112C AC servo motor has a winding resistance of 0.31 ohms and a thermal time constant of 100 minutes, which indicates how long the motor takes to cool down after use. The model has a torque constant of 0.94 Nm/A and an A-side power connection.

The model MDD112C-N-020-N2M-180PA1 needs no maintenance due to its lifetime lubricated bearings and brushless design and can rotate at a maximum nominal speed of 2000 revolutions per minute. The company supplies the model in order to provide customers with the creativity and flexibility essential to suit their demands. The motor (MDD112C-N-020-N2M-180PA1) has a 180 mm centering diameter, a keyed output shaft, and a maximum torque of 97.3 Nm at a current draw of 110.5 A.