Product Description

The MDD112C-N-015-N2L-130PA2 is a Bosch Rexroth servo motor. It belongs to the MDD product line. MDD servo motors are permanent magnet synchronous motors with electronic commutation. Use of rare-earth materials for magnet construction makes it possible to manufacture motors with low inertia. Together with compatible drive controllers, servo motors of the MDD series create cost-effective and rapid-response automation systems. Drives system with MDD servo motors are especially well-suited to applications such as tools, textiles, printing machines, robotics, handling equipment and transfer facilities. MDD motors provide high contouring accuracies at high feed rates, especially when used for cutting at high speeds. The high operating reliability of MDD motors is enabled by maintenance-free operation, which in turn is enabled by a brushless design of the motor and the use of life-time lubricated bearings.

The MDD112C-N-015-N2L-130PA2 is a motor with a standard housing suited to surface cooling and natural convection. Surface cooling requires operators to order an optional blower and install it on the motor. Natural convection is supported out of the box. The nominal speed rating is 1500 RPM. The MDD112C-N-015-N2L-130PA2 supports digital servo feedback. It works in combination with a controller that controls motor position and supplies electrical power. The main power socket on the MDD112C-N-015-N2L-130PA2 motor is located on side A of the housing. The MDD112C-N-015-N2L-130PA2 includes a 40 Nm blocking brake. The purpose of the brake is to prevent accidental shaft rotation. The brake operates at 24 Volts DC. Approximate weight of the brake is 3.5 kilograms. The combined weight of the motor and the brake is 51.5 kilograms. The motor hosing belongs to IP65 protection category. The main motor shaft includes a keyway.