Product Description

The MDD112C-N-015-N2L-130GA0 AC servomotor from Bosch Rexroth works with the manufacturer’s drive controller. The digital motor and drive controller combination offers a cost-effect automatization system. The associated controller is ideal for use in machine tools. The motor is suitable for high precision applications. The product incorporates electronic commutation. The standard housing of the device is designed to support both natural convection and surface cooling. The unit belongs to the MDD product group of such offerings. It has a laminated core embedded with permanent magnets. This motor renders maintenance-free operation. The product portrays a simple installation process. The device has a blocking brake.

The motor is associated with feedback that is specially designed for this series. The product has connectors in its flanged sockets for the power and feedback cables. This device should take utilization factors into consideration if the ambient operating conditions are exceeded. The unit supports operation under weatherproofed conditions in a stationary manner as per IEC 721-3-3 specifications. It can be used for extremely demanding applications only if its mounting has been done in a shock-decoupled or shock-damped way. The product is equipped with a mounting flange that is designed as per the B5 design. This MDD112C-N-015-N2L-130GA0 motor has a one-year warranty.

The device has a continuous torque of 28Nm in standstill mode with natural convection cooling mode. The unit installation can be carried out in any orientation. It has a standard pilot diameter of 130mm. The motor has a sealing on its shaft. The product is integrated with a plain shaft. This device can be fitted with a blower for surface cooling. This unit uses the blocking brake for the backlash-free holding of its servo axes when the machine in which it is installed is turned OFF. This brake does not offer assurance of personnel safety. The AC motor is shipped to any destination of your choice.