Product Description

The MDD112B-F-030-N2L-130GA0 digital AC servomotor is suitable for high-precision applications. This motor uses rare earth materials for its permanent magnets. This Bosch Rexroth motor encompasses a set of windings over and below the shaft. The product sports a brushless design. The device depicts a simple installation process on the machine. The unit encounters a radial force based on the point of application of force and the average speed. Its floating bearing is located on the A side of the motor. The motor portrays 112 size code. The product is associated with a simplified installation process when the manufacturer’s readymade cables are used. This device installation can be done in any orientation.

The motor supports non-positive type shaft hub connections. The product implements digital servo feedback with an optical system measuring principle. The device features a maximum speed based on the DC bus voltage from the supply source. The unit storage, as well as transportation, should be done between -20°C and 80°C. Its feedback helps to evaluate the position of its rotor. The motor incorporates a cylindrical shaft end in accordance with DIN 748, Section 3 specifications. The product has its electrical power connector directed to the A-side. This MDD112B-F-030-N2L-130GA0 motor has a warranty of one year.

The product startup can be done by only fully trained personnel. The device features provisions for lifting screws that adhere to DIN 580 specifications. The unit must be free of load at the shaft when it is lifted using a crane. It is to be stored in a shock-free environment. The motor feedback cable has poor adhesion on its surface to avoid sticking in drag chains. This product cannot be operated without a drive controller. The device incorporates circular connectors for feedback connection. The unit has an N balance class in compliance with DIN VDE 0530 specifications. This motor delivery is done globally to any desired destination.