Product Description

Bosch Rexroth is committed to providing superior customer service via the production of superior AC servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers. These components are often utilized in automated systems across several industries.

The MDD112A-N-020-N2L-130GA0 model has an inertia of 61 x 10^-4 kgm² and meets IP 65 dust and water protection standards. The model has a plain output shaft with a sealing ring, and it should only be used as specified in the manual. The MDD112A AC servo motor is powered via a wire with a minimum diameter of 0.75 mm² connected to the power connector on the A side of the housing. The AC servo motor weighing 25 kg has a 16 mH winding inductance, class N balance, and a housing that is suitable for natural and surface cooling. Due to its distinctive construction, the model may be used efficiently in the operation of the machine, even under challenging conditions. The motor features a 130-millimeter centered diameter and a 40-micron-thick black finish. The product must be installed and operated by a certified expert for best performance and minimal harm. This MDD112A AC servo motor produces 10.5 Nm of constant torque while using 11.8 A of constant current during a standstill operation.

The model MDD112A-N-020-N2L-130GA0 has digital servo feedback, a winding resistance of 1.40 ohms, and a thermal time constant of 100 minutes. This motor's windings are fitted with a temperature sensor to prevent overheating and overloading. The model produces 30.7 Nm of theoretical torque at a maximum nominal speed of 2000 revolutions per minute while drawing a maximum current of 11.8 A. The model (MDD112A-N-020-N2L-130GA0) has an insulation class of F and torque constant of 0.89 Nm/A.