Product Description

The Bosch MDD093D-F-030-N2M-110GL0 is a digital industrial servo motor. It is part of the MDD product line that includes nine different series of motors with different continuous torque and speed ratings. The MDD093 series is specially well suited to applications such as roller feeds for pressing, punching and nibbling machines. Nominal speed of the MDD093D-F-030-N2M- 110GL0 motor is 3000 RPM. The motor housing is designed for cooling through natural convection or surface cooling. Natural convection can be employed for loads that are on the lower side of the spectrum, and surface cooling can be employed for loads that are on the higher side of the spectrum. The balance class is standard and the shaft B end is also standard. The MDD093D-F-030-N2M-110GL0 includes an integrated multiturn encoder and supports digital servo feedback.

The main rotor shaft on the MDD093D-F-030-N2M-110GL0 motor is plain. Centering diameter of the servo motor is 110 millimeters. The power connection is on the left side of the housing. The MDD093D-F-030-N2M-110GL0 is without a blocking brake. The motor output data listed in the product documentation are valid for 0 to 45 degrees Celsius and 0 to 1000 meters altitude. If the ambient conditions deviate from these values, then the motor output will derate. If the temperature and altitude exceed specified limits at the same time, then the respective load factors will multiply. The MDD093D-F-030-N2M-110GL0 has a IP65 rated housing. The housing and covers protect against contact with high voltage motor parts, penetration of extrinsic objects and the penetration of water. The motor mass is approximately 28 kilograms. The motor housing is covered in black prime coat. Insulation class of the MDD093D-F-030-N2M-110GL0 is F.