Product Description

The MDD093C-N-040-N2L-130PB0 digital AC motor produced by Bosch Rexroth uses a protective motor switch for the connection of its blower. This AC motor is linked with digital servo feedback. The product features a 30,000 operating hours lifespan for its bearings in accordance with ISO 281 specifications. This device uses an INS 172 power connector for establishing the power connection. The unit has a customized 130mm pilot diameter for the mounting flange. Its encoder supports a relative indirect position evaluation of the motor. This product features a speed based on the torque requirements of the application. The device weighs 13kg without a blower fitting.

This motor is best suited for highly-dynamic applications. The unit comprises permanent magnets made of iron oxide or rare earth materials. It is free of any blocking brake for its operation. This product incorporates lifetime lubrication for its bearings. The device permits direct operation within the working area of the machine even under poor environmental conditions. This unit has high overload capabilities because of the efficient conduction of heat from the walls of the stator to the external walls of its housing. Its windings are integrated with a temperature sensor that monitors the motor temperature and prevents the possibility of overload damage.

The motor is associated with a keyway shaft. This product is likely to become very hot when it is used. The device portrays derated output when the installation elevation ranges between 1000m and 5000m over sea level. This unit does not get damaged by the spraying of a jet of water. The lateral, as well as longitudinal axes, have frequencies ranging between 2Hz and 9Hz with sinusoidal oscillations. The motor housing can have an additional paint layer of not more than 40µm. This product is associated with a mounting flange featuring throughholes for Design B5 mounting. This MDD093C-N-040-N2L-130PB0 AC motor with a backup support period of one year is shipped worldwide.