Product Description

The Bosch MDD093C-N-020-N2M-110GA2 is a MDD series servo motor. The motor is packed into a palette or carton at the time of delivery. The method of packing depends on the number of motors and their sizes. A single motor is held securely by taut metal bands. If multiple motors are on the same palette then they are separated by pieces of Styrofoam or cartons. To protect against damage from inclement weather, a carton is placed over the palette and is held in place with the use of taut bands. The taut bands can be cut through during unpacking. An envelope containing the delivery slip is attached to the motor carton. A barcode sticker is also attached and lists the motor type code and other relevant details. The barcode sticker is provided for product identification and should be checked at the time of product delivery.

The MDD093C-N-020-N2M-110GA2 motor includes several integrated features that are a 22 Nm blocking brake, digital servo feedback with integrated multiturn absolute encoder, plain shaft and a housing that cools through natural convection or surface cooling. Natural convection can be employed for lower motor loads and surface cooling for higher motor loads. Centering diameter of the MDD093C-N-020-N2M-110GA2 is 110 millimeters. The power connector is on side A of the housing. The nominal motor speed is 2000 RPM. The continuous toque and current at standstill with natural convection are 19.5 Nm and 21.4 Amps respectively. The continuous toque and current at standstill with surface cooling are 28 Nm and 30.8 Amps respectively. Weight of the MDD093C-N-020-N2M-110GA2 motor is 22 kilograms. The MDD093C-N-020-N2M-110GA2 should only be installed by qualified, trained and experienced personnel.