Product Description

The Bosch MDD093C-F-030-N2L-130GA2 is a servo motor. It includes integrated support for digital servo feedback. This feature enables use of the motor with a compatible servo controller. In addition to controlling motor speed, the controller also supplies motor power. The controller sends motor power via a dedicated power cable. Customers need to specify the location of the power connector on the motor. The power connector on the MDD093C-F-030-N2L-130GA2 is on side A of the housing. MDD motor shafts have two shaft designs: plain and with keyway. The shaft on the MDD093C-F-030-N2L-130GA2 motor is plain. The motor centering diameter is 130 millimeters. The MDD093C-F-030-N2L-130GA2 is flange-mounted. Through-holes on the motor flange and suitable mounting screws allow secure machine mounting. The motor also supports a blocking brake. Voltage rating of the brake is 24 Volts DC. Nominal current rating of the brake is 0.7 Amps.

Holding torque of the holding brake is 22 Nm. The brake is a safety device that prevents shaft rotation at startup. It prevents unintended shaft rotation and thus prevents injuries and equipment damage. The nominal speed rating of the MDD093C-F-030-N2L-130GA2 is 3000 RPM. MDD motors support natural convection and surface cooling. Natural convection is suited to lower loads that requires lower motor torque and output current. Surface cooling is suited to higher loads that require higher motor output torque and current. The permitted ambient temperature for motor operation is 0 to 45 degrees Celsius. The recommended storage/transport temperature range is -20 to 80 degrees Celsius. The maximum installation elevation is 1000 meters above mean sea level. Protection category of the motor housing is IP65. The color of the motor housing is black.