Product Description

Bosch Rexroth is a well-known manufacturer of servo motors, spindle motors, synchronous motors, brake choppers, frequency converters, drive controllers, inverters, drive converters, and other components.

The MDD093B-N-060-N2M-110PA1 model with a moment of inertia of 29 x 10^-4 kgm² can rotate at a maximum rotating speed of 6000 RPM. The model has a winding resistance of 0.11 ohms and torque constant of 0.31 Nm/A at 20 degrees Celsius. A temperature sensor is included between the windings and the MDD093B AC servo motor to keep track of temperature and prevent overheating, and it uses both natural and surface cooling to extract heat from the housing and has a thermal time constant of 50 minutes. At a standstill, the servo motor needs clean, dust-free, and turbulence-free conditions to perform optimally and generate a constant torque of 14.5 Nm with continuous current consumption of 14.5 A. The model weighs 16.5 kilos and has a winding inductivity of 1.3 mH. This low-cost AC servo motor is ideal for a variety of mechanical systems, with a maximum torque of 45.1 Nm and current consumption of 210.3 A. The MDD093B AC servo motor has an insulation rating of F and a protection category of IP65, with extra protection in the form of a 40µm layer thickness black paint coating on the housing.

The model MDD093B-N-060-N2M-110PA1 has improved semantics and an adequate torque inertia ratio with improved load characteristics due to good conduction of heat from the stator windings to the outer wall of the motor housing. The model features a balancing class of N as well as a blocking brake with a holding torque of 11 Nm. The model (MDD093B-N-060-N2M-110PA1) has a shaft with keyways and a power connection on the A-side of the motor housing (sides are specified in the user manual).