Product Description

The MDD093B-N-030-N2L-110PB2 digital AC servomotor produced by Bosch Rexroth is operated with tool changing equipment. The servomotor requires very less or no maintenance at all because of the brushless design. The product features different continuous currents and torque in standstill mode according to the cooling method used. The device supports operation outside a control cabinet and directly within the working area of the associated machine. The unit renders efficient heat conduction from the windings of the stator to the exterior wall of its housing. It deploys digital servo feedback. The motor operating temperature must never exceed 55°C. The product has hot housing during and soon after operation.

The device has a 0.3mm maximum excursion amplitude for its longitudinal axis as per Class 3M1. This unit features form-fitting type transmission of torque. It must be ensured that there is no liquid entry at any point of time into the motor from along the integrated output shaft. This motor may have a multi-axial stress state at the shaft-hub connection point. The product renders protection against contact with high voltage parts. This device might have reduced the quality of concentricity during powerful reverse operations. The output direction of the angle feedback connector can be altered by releasing the four fixing screws.

The motor has standardized electrical connections. The product portrays a separate blower connection if a blower is used for surface cooling. The device uses the related drive controller to control the blocking brake. This unit highlights its torque-limiting data and speed limiting data through its operating curves. Its encoder has a system accuracy of +/-0.5 angular minutes. The maximum motor speed limit is set by the DC bus voltage generated by the supply source at its drive. This MDD093B-N-030-N2L-110PB2 motor with one-year backup support is sent to any address in the world according to your preference.