Product Description

Bosch Rexroth is a manufacturer of products that improve system performance. Due to its vast product range, the model is a one-stop shop for all industrial automation requirements.

The MDD093B-N-020-N2L-130GA0 model has a balance class of N and a centering diameter of 130 mm. With an IP65 certification, the motor is resistant to dust and moisture. The first number denotes dust protection, while the second number implies liquid protection. The MDD093B AC servo motor has an A-side power connection and a thermal time constant of 50 minutes when surface-cooled. The motor may only be transported or stored between -20 and +80 degrees Celsius. Electrical commutation and permanent magnets are used in the construction of the model. The maximum output torque of the motor is 45.1 Newton meters, and the maximum speed is 2,000 revolutions per minute. The model must be used at temperatures between 0 and 45 degrees Celsius and altitudes between 0 and 1000 meters in order to obtain the needed levels of power. Using a low continuous current of 16.9 amperes, the 16.5-kilogram servo motor can continually generate 14.5 Newton-meters of torque at a standstill. The MDD093B AC servo motor has an insulation rating of F and a sealing ring on its plain output shaft.

The model MDD093B-N-020-N2L-130GA0 must be used with the drive controller and accessories specified by the manufacturer. For interference-free operation, strain reliefs must be installed on the conduit threaded connection of the motor's power connection. The model is anticipated to have a long lifetime due to its brushless design and smooth bearings. This servo motor (MDD093B-N-020-N2L-130GA0) from Wake Industrial comes with a one-year warranty as standard.