Product Description

MDD093B-F-060-N2L-110GA0 is synchronous servo motor. It is designed by Bosch Rexroth. Typical applications for MDD motors include robotics, handling equipment, tools and textiles. MDD093 motors are especially well-suited highly dynamic applications that include roller feeds for punching machines, nibbling machines and nibbling machines. MDD motors are made with permanent magnets that allow construction of motions with low inertia. The major benefit of low inertia is that reduced torque is required to rotate a stationary shaft. The shaft on the MDD093B-F-060-N2L-110GA0 motor is plain and includes a seal. The shaft seal helps to protect motor bearings from dust, moisture and other contaminants. This helps to improve motor reliability and its operating life span. However the seal does degrade during operation and must be replaced periodically. Protection category of the motor housing is IP65. This is the result of a sealed housing, sealed cable connectors and the shaft seal.

IP65 rated housings allow use in adverse environments. This helps to reduce cost and the total cost of ownership. Speed rating of the servo motor is 6000 RPM. The housing has a standard design. The motor supports digital servo feedback. Its centering diameter is 110 millimeters. The main power connection is on side A of the housing. Bosch provides optional blocking brakes for MDD motors that help to prevent accidental motor movement. However, the MDD093B-F-060-N2L-110GA0 motor is without a blocking brake. The working temperature range is 0 to 45 degrees Celsius, and the storage temperature range is -20 to 80 degrees Celsius. Housing of the motor is coated with prime black coat (RAL 9005). Only trained personnel, who have read and understood instruction in the product manual, should handle, operate and maintain the servo motor.