Product Description

The MDD093A-N-030-N2M-110GB0 digital AC servomotor works in combination with the manufacturer’s digital drive controller. This Bosch Rexroth motor is best suited for highly dynamic applications. The product has low inertia because of the materials used for its permanent magnets. The device features favorable torque to inertia ratio. The unit must consider utilization factors if its ambient conditions are exceeded. It has IP 65 protection rating for its output shaft as well as power, feedback and blower connections. The motor housing coat is resistant to dilute acids and lyes. The product must never have liquid accumulation around the output shaft with the shaft facing upwards.

The device encounters thermal stress when drive pinions with helical teeth are fixed axially to the machine. The unit has a reduced balanced class. Its power connector is directed to the B side of the motor. The motor supports both angled and straight connectors for its feedback connection. The product gets shut down automatically when the temperature sensor detects a very high housing temperature. This device houses an absolute optical encoder system that permits indirect position detection. The unit uses its torque-speed characteristics to determine the speed at it which it can rotate for a specific application.

The motor has 28.6Nm theoretical maximum torque. The product supports a cylindrical shaft end with DS M3-8 centering hole. The device housing supports surface cooling and natural convection cooling. The unit uses a cable with a minimum 16AWG cross-section for its power connection. Its power connector can be of either soldering type or crimping type. This motor features the technical details needed for service on its type plate. The product must neither be tipped nor dropped during transport. The device should be free of impact on the shaft during transit. This MDD093A-N-030-N2M-110GB0 motor has a warranty for one year and is shippable everywhere across the globe.