Product Description

Bosch Rexroth is committed to providing superior customer service by producing excellent AC servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers. These components are widely used in automated systems across a variety of industries.

The MDD093A-N-030-N2L-110GA0 model is IP 65 compliant, has class F insulation, and a moment of inertia of 22 x 10^-4 kgm². The model has a plain output shaft with a sealing ring, and it should only be used following the user manual's recommendations. The MDD093A AC servo motor is driven by a wire with a minimum 0.75 mm2 diameter, with the power connector located on housing side A. The 13-kilogram AC servo motor has a winding inductivity of 4.9 mH, a balancing class of N, and a housing that suits natural and surface cooling. Due to its outstanding design, the model is instantly used in the machine's operation, even under challenging situations. The motor has a 110 mm centering diameter and a black coating with a 40 m layer thickness. For maximum performance and to avoid damage, a skilled technician must install and operate the model. This MDD093A AC servo motor produces 9.2 Nm of constant torque while using 17.8 A of continuous current.

The model MDD093A-N-030-N2L-110GA0 has digital servo feedback, 0.61 ohms of winding resistance, and a 50-minute thermal time constant. The servo motor generates 28.6 Nm of theoretical torque and consumes 79.9 A of peak current, while operating at the nominal speed of 3000 revolutions per minute. The windings of this motor (MDD093A-N-030-N2L-110GA0) are integrated with a temperature sensor to regulate temperature and prevent overload damage, and a maximum installation height of 1,000 meters above sea level is permitted.