Product Description

Bosch Rexroth is dedicated to offering exceptional customer service via the creation of quality AC servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers. These devices are commonly used in automated systems across a broad spectrum of sectors.

The MDD090C-N-020-N2L-130PA2 model contains an output shaft with keyways and a sealing ring, and it should only be used per the instructions in the user handbook. The motor produces 58.6 Nm of theoretical torque and utilizes 72.9 A of peak current while rotating at a maximum nominal speed of 2,000 revolutions per minute. The MDD090C AC servo motor provides digital servo feedback, a winding resistance of 1.20 ohms, and a thermal time constant of 60 minutes. The 23-kilogram AC servo motor has a winding inductivity of 6.8 mH, a balancing class of N, and natural and surface cooling housing. This servo motor provides a constant torque of 10.4 Newton-meters while using a constant current of 12.1 amperes. Due to its superior construction, it may be used directly in the machine's workplace, even under difficult conditions. The MDD090C AC servo motor is driven by a wire with a minimum 0.75 mm² diameter; the power connection is placed on side A of the motor.

The model MDD090C-N-020-N2L-130PA2 complies with IP 65, has insulation class F, and has a moment of inertia of 53 x 10^-4 kgm². This motor's windings are equipped with a temperature sensor to manage temperature and avoid overload damage, and a maximum altitude of 1,000 meters above sea level is permissible. The model's (MDD090C-N-020-N2L-130PA2) holding brake features clamping and releases delays of 20 milliseconds and 60 milliseconds, respectively. The holding brake has 11 Nm of holding torque and 0.5 A of the nominal current.