Product Description

Bosch Rexroth prides itself on its commitment to innovation and continuous improvement. It is the manufacturer of the AC servo motors of the MAC series with low inertia. Their typical areas of application include handling equipment, robotics, and machine tools.

The MAC090C-0-GD-4-C/110-B-1/WI505LV/S010 is a MAC model whose high cyclic load capacity permits its use in repeated stress cycles without failure due to fatigue. As a result, it is the ideal choice for continuous start-stop operations with high repetition rates. It comes with lifetime-lubricated bearings that limit its maintenance requirements and improve its operational reliability. The nominal service life of the bearings is 30,000 operating hours. This MAC motor is equipped with integrated thermo switches in its windings and stator housing to monitor its temperature. Its compact size allows for easy installation and gives it a high power-to-weight ratio. Thanks to its use of ready-made cables, additional installation work is eliminated.

Like other motors in the MAC series, the housing of the MAC090C-0-GD-4-C/110-B-1/WI505LV/S010 is sealed, complying with the IP 65 Ingress Protection category per DIN 40 050. This allows its risk-free use directly within the working area of the machine. It can be used, even under poor environmental conditions, such as the effects of coolants and soluble oil emulsions. The motor is touch-proof, dustproof, and impervious to water jets from different directions. Its housing is painted with a black prime varnish whose protective properties are effective against yellowing, weathering, and chalky buildup. There is also a standard blocking brake of 6.5 Nm torque in the motor to hold the servo axes backlash-free when the machine is powered off.