Product Description:

The MAC132A-0-ED-1-B/B5-A-0/J625/S01 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. The unit is intended for analog drive systems, delivering commanded torque directly to machine shafts so indexing tables, feed axes, or pick-and-place modules can move at regulated speeds without additional transmission stages. Its permanent-magnet rotor and electronic feedback allow the motor to close the position loop through the drive controller, making it a compact actuator for general-purpose industrial automation.

The housing carries an IP65 rating, so dust ingress is prevented and the winding compartment resists low-pressure water jets during washdown cleaning. Rotor position is returned to the drive through incremental encoder feedback, letting the control electronics generate high-resolution velocity and acceleration profiles. Torque production is synchronized by electronic commutation, so no brushes are present and commutator wear and sparking are eliminated. The deep-groove bearings are filled at assembly and are specified as lubricated for life, which removes the need for periodic re-greasing. Heat generated in the stator is released through natural convection across the aluminum frame, allowing installation without forced-air ducts when cabinet space or airflow is limited.

The magnet system follows a permanent-magnet-excited design that delivers constant flux density regardless of operating speed, giving stable torque response across the speed band. A brushless construction further lowers mechanical drag and electrical noise, supporting smooth motion at low RPM. For over-temperature events, integrated thermo switches open the control circuit so the motor is disconnected before coil insulation is stressed. The factory-assigned winding code is ED, which indicates the electrical characteristics used by the matching drive.