Product Description:

The MAC132A-0-ED-1-B/230-R-0-I01250/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It is intended for industrial automation tasks that call for accurate rotary motion, such as coordinated axes in machining centers, pick-and-place gantries, or conveyor indexing stations. When connected to a compatible drive controller, the motor produces regulated torque and speed so that commanded positions or velocities are reproduced precisely on the mechanical load.

A centering diameter of 230 mm supports accurate alignment during installation on the mating machine surface. Inside the stator, an ED winding establishes the magnetic circuit characteristics that affect current draw and thermal behavior. Heat produced by copper and iron losses leaves the housing through natural convection, so no external fan or liquid circuit is required, and cabinet airflow must remain unobstructed. For position verification, the shaft is fitted with incremental encoder feedback, providing a countable pulse train that enables the drive to close its velocity or position loop. Mechanical installation follows the B05 flange pattern, meaning the motor fastens to a pilot diameter without an integrated foot, which is common on vertical or face-mount frames.

The power leads exit through a sealed connector on the right side, simplifying cable routing when motors are aligned in series along a machine bed. Torque is transmitted through a shaft that includes a DIN 6885-1 keyway, giving positive engagement with couplings or pulleys. Because there is no blocking brake, holding torque during a power-off state must be provided by the drive or an external mechanical lock. Classified by Rexroth as a motor for analog drives, the unit accepts analog speed or current commands, making it suitable for legacy control platforms that rely on ±10 V reference signals rather than fully digital fieldbus communication.