Product Description:

The Bosch Rexroth Indramat MAC115D-2-CS-4-C/130-A-2/WI520LV/S001 belongs to the MAC AC Servo Motors series. Supplied as a motor for analog drives, it translates drive-controller voltage commands into controlled rotary motion. This makes it suitable for tooling, indexing tables, feed axes, and other motion points in automated equipment.

This model incorporates a heavy-duty blocking brake that locks the shaft when the drive is disabled, and it provides 60 Nm of holding torque for vertical loads. Cooling air is driven by an integral blower rated at AC 115 V, so forced ventilation keeps the stator within thermal limits during constant duty. A centering diameter of 130 mm supports concentric mounting to gearboxes or adapter plates, while the housing uses axial surface cooling so nearby machine elements can remain close without blocking airflow. Length code D, frame size 115, and winding code CS identify the electromagnetic stack used for this motor. Standard tacho quality provides 3 V per 1000 rpm for speed feedback, and the internal wiring accepts either incremental or absolute encoder modules for different control loops.

Rated for a nominal speed of 3000 rpm, the rotor supports rapid start-stop cycles used in pick-and-place or forming stations. Torque is transferred through a shaft with a DIN 6885 keyway, giving a positive fit to couplings without slip. Mains conductors enter through a compact connector on side A, which keeps cable routing direct inside servo cabinets and leaves access clear at the connection point. Position data is generated by the integrated incremental encoder with standard mounting; when combined with the tacho feedback channel, it supports simultaneous velocity and position regulation. This arrangement allows the motor to serve axes that need both stable speed control and accurate positioning during repetitive machine cycles.