MAC115D-0-CS-4-C/180-B-1/WA605XX/S001
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911236321
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAC Permanent Magnet Motor manufactured by Bosch Rexroth Indramat. This motor has a power connecter on Side B. This motor also includes a D encoder and a Standard blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC115D-0-CS-4-C/180-B-1/WA605XX/S001 AC servomotor manufactured by Bosch Rexroth operates along with the manufacturer's drive controller. This motor must be installed only in industrial machinery. The product is always associated with tacho feedback. This device features a high degree of reliability. The unit is delivered with a blocking brake. It encompasses two sets of windings. This motor comes with its output shaft on Side A. The product is not designed to be used with extreme loads. This device has two M8 tapped holes on its housing. The unit must be properly grounded before it is operated. It encompasses permanent magnets in its rotor. This motor is directly connected to its cables using connectors on the flanged sockets. The product is protected by its housing and covers. This device should not be lifted by using its output shaft. The unit is painted with a black prime coat on its housing. It can be used with a mounting flange with throughholes or windings.
This motor should be commissioned after storage for an extensive period. The product depicts a fixed output direction of the power connector. This device comprises a rating plate on its housing. The unit can be repainted up to a maximum thickness of 40 um after closing its connectors. Its cables must be routed as given in its manual. This motor has a customized pilot diameter for its mounting flange. The product encompasses a shaft sealing ring around the output shaft. This device encounters axial and radial forces during its operation. The unit has a very hot surface during and immediately after its operation. It does not need a blower or fan for its cooling action. This AC servomotor uses a PLC or a hardware switch to control its holding brake.
