Product Description:

The MAC115D-0-CS-4-C/130-A-2/WI520LV/S001 is an AC servo motor built by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. As a motor for analog drives, it converts command voltages from legacy controller cards into regulated torque and speed for axis motion in automated machinery. When paired with external feedback electronics and drive amplifiers, the unit serves as the electromechanical actuator for positioning and speed-controlled motion on production equipment. This makes it suitable for packaging lines, transfer systems, and other machines that still use analog servo control architecture.

Mechanical holding capacity is provided by a heavy-duty blocking brake that delivers 60 Nm of static torque to secure vertical or retention axes when power is removed. This helps prevent unintended movement while the axis is stopped. The motor registers concentrically against mounting fixtures with a 130 mm centering diameter, which supports accurate flange alignment. Heat is released by natural convection, so airflow around the housing must be maintained rather than supplied by forced cooling hardware. During motion, the rotor can reach a nominal speed of 3000 rpm, which suits fast indexing duties. Power enters through a connector on side A, which can simplify cable routing when the shaft faces forward.

The housing uses length D, and the 115 frame code gives the motor the active stack height needed for medium-power axes. Winding set CS balances current demand and back EMF so analog amplifiers can operate without large filter networks. Speed feedback is generated by a 3 V/1000 rpm tacho coupled to an incremental encoder, and this combination supports closed-loop speed and position control. The feedback arrangement gives the connected drive a continuous speed signal together with incremental position data for stable regulation. A DIN 6885 keyway locks the shaft to couplings, and the assembly’s standard tacho quality supports repeatable operation in packaging, printing, and material-handling equipment.